Close Go back Collapse all sections
Process Data set: TIMANTTI 3 (en) en

Key Data Set Information
Location FI
Geographical representativeness description FI
Reference year 2023
Name
TIMANTTI 3
Use advice for data set This LCA is a Cradle-to-Grave with options. All major steps, from the extraction of natural resources to the final disposal of the product, are included in the scope of the study. The life cycle stages included are A1-A5, C2 and C4 and D. The use stage, B, is not considered in this study, since no impact are associated with the use stage. C1 and C3 are excluded, because there are no dismantling or demolition activities and no waste processing steps respectively. All impacts associated with the upstream production of materials and energy are included in the system boundaries. Mining activities and controlled landfills are included in the product systems. Wastewater treatment is not considered within the technological systems since it is already included in the solid waste treatment processes. The emissions and resource extractions derived from these processes are considered elementary exchanges between the product systems and the environment. Paint products do not consume resources and are not released into the environment during the use phase. Moreover, painted surfaces do not require maintenance, repair, replacement or refurbishment beyond their normal use, so no impact is considered for modules B1 to B7 and therefore excluded in this assessment. Regarding the end-of-life stage, the waste processing stage (C3) is irrelevant as no further processing is required during the end-of-life of decorative paints since they are disposed together with the substrate where they are applied on and not reused or recycled. Since the efficiency rate cannot be considered higher than 60% it is not included in this assessment. Module D is included to show the benefits and loads beyond the system boundary from the net output of recovered energy from the product system. Energy recovery values for the paint waste are taken on the default level in PEFCR for decorative paints: 1.01 MJ of electricity and 2.16 MJ of heat per kg of waste. Energy recovery values for the packaging materials waste are taken from the background documentation of the respective Ecoinvent datasets. The allocation is made in accordance with EN15804:A2. Allocation is based on physical and production shares. Energy and water use are allocated according to production volume.
Technical purpose of product or process For priming unpainted concrete, plaster, filler, brick and building board surfaces. TIMANTTI 3 can be used as an adhesion primer for wall and ceiling surfaces previously painted with alkyd or dispersion paints. Also suitable for priming surfaces that are to be wallpapered or to which a stick-on wall covering (e.g. a non-woven wallpaper) is attached. TIMANTTI 3 can also be applied on galvanized sheet metal surfaces, such as air condition pipes. For priming unpainted concrete, plaster, filler, brick and building board surfaces. TIMANTTI 3 can be used as an adhesion primer for wall and ceiling surfaces previously painted with alkyd or dispersion paints. Also suitable for priming surfaces that are to be wallpapered or to which a stick-on wall covering (e.g. a non-woven wallpaper) is attached. TIMANTTI 3 can also be applied on galvanized sheet metal surfaces, such as air condition pipes.
General comment on data set The allocation is made in accordance with EN15804:A2. Allocation is based on physical and production shares. Energy and water use are allocated according to production volume There was no cut-off of raw materials or other inputs or outputs in any stage of the life cycle. Cut-offs in the background processes are according to the respective methodologies (see documentation of the relevant processes [Wernet, G. et al. 2016; https://www.ecoinvent.org/], [Dahlgren, L. et al., 2016]). Furthermore, brushes, clothes, buckets etc., used during the application process are excluded from the assessment since they are being considered capital goods.
Copyright Yes
Owner of data set
Quantitative reference
Reference flow(s)
Biogenic carbon content
  • Carbon content (biogenic): 0.0 kg
  • Carbon content (biogenic) - packaging: 0.0162 kg
Time representativeness
Data set valid until 2028
Time representativeness description "2023-05-08" - "2028-05-08"
Technological representativeness
Technology description including background system TIMANTTI 3: https://www.teknos.com/document/tds/en_0862_15.pdf

Indicators of life cycle

IndicatorDirectionUnit Production
A1-A3
 Transport
A4
 Installation
A5
 De-construction
C1
 Transport
C2
 Waste processing
C3
 Disposal
C4
 Recycling Potential
D
Use of renewable primary energy (PERE)
Input
  • 1.35
  • 0.00523
  • 0.016
  • 0
  • 0.000569
  • 0
  • 0.000505
  • -0.0389
Use of renewable primary energy resources used as raw materials (PERM)
Input
  • 0.017
  • 2.44E-9
  • 3.4E-9
  • 0
  • 2.66E-10
  • 0
  • 1.21E-9
  • -1.45E-9
Total use of renewable primary energy resource (PERT)
Input
  • 1.37
  • 0.00523
  • 0.016
  • 0
  • 0.000569
  • 0
  • 0.000505
  • -0.0389
Use of non renewable primary energy (PENRE)
Input
  • 11.9
  • 0.411
  • 0.731
  • 0
  • 0.0447
  • 0
  • 0.0582
  • -0.415
Use of non renewable primary energy resources used as raw materials (PENRM)
Input
  • 9.01E-7
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Total use of non renewable primary energy resource (PENRT)
Input
  • 11.9
  • 0.411
  • 0.731
  • 0
  • 0.0447
  • 0
  • 0.0582
  • -0.415
Use of secondary material (SM)
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Use of renewable secondary fuels (RSF)
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Use of non renewable secondary fuels (NRSF)
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Use of net fresh water (FW)
Input
  • 0.0124
  • 0.0000487
  • 0.000252
  • 0
  • 0.0000053
  • 0
  • 0
  • -0.00019
Hazardous waste disposed (HWD)
Output
  • 0.00436
  • 0
  • 0.0803
  • 0
  • 0
  • 0
  • 0.394
  • 0
Non hazardous waste dispose (NHWD)
Output
  • 0.0216
  • 0
  • 0.088
  • 0
  • 0
  • 0
  • 0
  • 0
Radioactive waste disposed (RWD)
Output
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Components for re-use (CRU)
Output
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Materials for recycling (MFR)
Output
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Materials for energy recovery (MER)
Output
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Exported electrical energy (EEE)
Output
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Exported thermal energy (EET)
Output
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0

IndicatorUnit Production
A1-A3
 Transport
A4
 Installation
A5
 De-construction
C1
 Transport
C2
 Waste processing
C3
 Disposal
C4
 Recycling Potential
D
Abiotic depletion potential - fossil resources (ADPF)
  • 11.9
  • 0.411
  • 1.04
  • 0
  • 0.0448
  • 0
  • 0.79
  • -0.545
Abiotic depletion potential - non-fossil resources (ADPE)
  • 0.00000678
  • 6.02E-8
  • 3.57E-7
  • 0
  • 6.56E-9
  • 0
  • 9.32E-8
  • -1.76E-8
Acidification potential, Accumulated Exceedance (AP)
  • 0.00384
  • 0.000132
  • 0.000273
  • 0
  • 0.0000144
  • 0
  • 0.000173
  • -0.0000829
Depletion potential of the stratospheric ozone layer (ODP)
  • 1.04E-7
  • 6.27E-9
  • 1.93E-8
  • 0
  • 6.83E-10
  • 0
  • 1.3E-8
  • -2.67E-9
Eutrophication potential - freshwater (EP-freshwater)
  • 0.000186
  • 0.00000163
  • 0.00000984
  • 0
  • 1.78E-7
  • 0
  • 0.00000189
  • -0.0000134
Eutrophication potential - marine (EP-marine)
  • 0.000853
  • 0.0000455
  • 0.0000554
  • 0
  • 0.00000496
  • 0
  • 0.0000291
  • -0.0000159
Eutrophication potential - terrestrial (EP-terrestrial)
  • 0.00621
  • 0.000497
  • 0.000557
  • 0
  • 0.0000542
  • 0
  • 0.000322
  • -0.000146
Global Warming Potential - biogenic (GWP-biogenic)
  • -0.0274
  • 0.0000951
  • 0.0221
  • 0
  • 0.0000104
  • 0
  • 0.000127
  • -0.00131
Global Warming Potential - fossil fuels (GWP-fossil)
  • 0.792
  • 0.026
  • 0.161
  • 0
  • 0.00284
  • 0
  • 0.168
  • -0.0262
Global Warming Potential - land use and land use change (GWP-luluc)
  • 0.000635
  • 0.00000973
  • 0.0000288
  • 0
  • 0.00000106
  • 0
  • 0.00000812
  • -0.0000318
Global Warming Potential - total (GWP-total)
  • 0.765
  • 0.0261
  • 0.183
  • 0
  • 0.00285
  • 0
  • 0.168
  • -0.0276
No records found.
No records found.
No records found.
No records found.
No records found.
No records found.
No records found.
No records found.
Photochemical Ozone Creation Potential (POCP)
  • 0.0084
  • 0.000148
  • 0.000201
  • 0
  • 0.0000162
  • 0
  • 0.000103
  • -0.0000424
Water (user) deprivation potential (WDP)
  • 0.532
  • 0.00209
  • 0.0153
  • 0
  • 0.000227
  • 0
  • 0.00526
  • -0.0107

IndicatorUnit Production
A1-A3
 Transport
A4
 Installation
A5
 De-construction
C1
 Transport
C2
 Waste processing
C3
 Disposal
C4
 Recycling Potential
D
1This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
2The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Comparative Toxic Unit for ecosystems (ETP-fw) 2
  • 17.7
  • 0.331
  • 89.5
  • 0
  • 0.0361
  • 0
  • 0.74
  • -0.165
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c) 2
  • 6.82E-10
  • 9E-12
  • 3.7E-11
  • 0
  • 1E-12
  • 0
  • 3.27E-10
  • -5E-12
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc) 2
  • 2.66E-8
  • 3.03E-10
  • 1.78E-9
  • 0
  • 3.3E-11
  • 0
  • 6.04E-10
  • -1.47E-10
Potential Human exposure efficiency relative to U235 (IRP) 1
  • 0.117
  • 0.00207
  • 0.00566
  • 0
  • 0.000226
  • 0
  • 0.00378
  • -0.00792
Potential Soil quality index (SQP) 2
  • 8.99
  • 0.468
  • 0.272
  • 0
  • 0.051
  • 0
  • 0.205
  • -0.0459
Potential incidence of disease due to PM emissions (PM) 2
  • 4.01E-8
  • 2.42E-9
  • 2.34E-9
  • 0
  • 2.63E-10
  • 0
  • 1.65E-9
  • -2.3E-10