| Key Data Set Information | |
| Location | FI |
| Geographical representativeness description | FI |
| Reference year | 2025 |
| Name |
|
| Use advice for data set | The EPD type is cradle to gate with options, modules C1–C4, and module D. This system boundary includes all relevant life cycle stages: raw material supply (A1) and transport (A2), manufacturing processes (A3), transport of the product (A4) and packaging waste recycling (A5) were included. In accordance with the ECO platform guidelines for electronic products, all B modules are declared from the product use phase. The end-of-life phase covered product demolition (C1) and transport to a recycling facility (C2), waste processing (C3) and disposal (C4). No relevant life cycle stages were omitted. Manufacturing of the machines and construction of the facilities required for the production are excluded, as is transportation of employees. The system boundary of the assessment is presented the picture. Key assumptions related to life cycle stages are described below. |
| Technical purpose of product or process | This EPD describes the Ouman product H2302 OMA0184 controller with field devices, which is a programmable automation system that enables monitoring and management of a property's building automation. The programming of the Ouflex building automation system takes place with the Ouflex Tool. Ouman H23 heating controllers are used in district heating substations at private houses. H23 product can control basic functions of two heating circuits and one domestic hot water circuit. H23 is mostly used in ready-made packages for district heating substation manufacturers who sell ready-made packages for end customers with their own brands. |
| General comment on data set | Allocation is required if the production process produces more than one product and the flows of materials, energy and waste cannot be separately measured for the studied product. Avoiding allocation could not be avoided for electricity and heating consumption, and waste generation, as the information was only measured on factory level. The inputs were allocated to each studied product based on their production volume (mass in kilograms). This study does not exclude any modules or processes which are stated mandatory in the EN 15804:2012+A2:2019 and the applied PCR. Data was available for all inputs and outputs, and thus no flows had to be excluded from this assessment due to lack of detailed data. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2030 |
| Time representativeness description | "2025-01-21" - "2030-01-21" |
| Technological representativeness | |
| Type of data set | EPD | ||||
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2025-07-31T17:03:57 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 6e6937d4-654a-43aa-bae7-e1ff973da3e2 |
| Date of last revision | 2025-07-03T10:19:13.174256Z |
| Data set version | 00.03.000 |
| Registration authority |
EPDFinlandRTS
|
| Registration number | RTS_345_25 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
| |
Indicators of life cycle