Process data set overview page

Data set: TEKNOSPRO 5 (00.05.001)

Other versions:00.03.00100.03.000

View entire data set

Download data set as XML file

Download as ZIP file

Full name TEKNOSPRO 5

Location FI

Reference year 2023

Valid until 2028

Reference flow(s) TEKNOSPRO 5 - 1.0 * 1.0 qm (Area)

Type EPD

Parameterized? no

LCIA results included? yes

Category

Synonyms

Use advice for data set This LCA is a Cradle-to-Grave with options. All major steps, from the extraction of natural resources to the final disposal of the product, are included in the scope of the study. The life cycle stages included are A1-A5, C2 and C4 and D. The use stage, B, is not considered in this study, since no impact are associated with the use stage. C1 and C3 are excluded, because there are no dismantling or demolition activities and no waste processing steps respectively. All impacts associated with the upstream production of materials and energy are included in the system boundaries. Mining activities and controlled landfills are included in the product systems. Wastewater treatment is not considered within the technological systems since it is already included in the solid waste treatment processes. The emissions and resource extractions derived from these processes are considered elementary exchanges between the product systems and the environment. Paint products do not consume resources and are not released into the environment during the use phase. Moreover, painted surfaces do not require maintenance, repair, replacement or refurbishment beyond their normal use, so no impact is considered for modules B1 to B7 and therefore excluded in this assessment. Regarding the end-of-life stage, the waste processing stage (C3) is irrelevant as no further processing is required during the end-of-life of decorative paints since they are disposed together with the substrate where they are applied on and not reused or recycled. Since the efficiency rate cannot be considered higher than 60% it is not included in this assessment. Module D is included to show the benefits and loads beyond the system boundary from the net output of recovered energy from the product system. Energy recovery values for the paint waste are taken on the default level in PEFCR for decorative paints: 1.01 MJ of electricity and 2.16 MJ of heat per kg of waste. Energy recovery values for the packaging materials waste are taken from the background documentation of the respective Ecoinvent datasets. The allocation is made in accordance with EN15804:A2. Allocation is based on physical and production shares. Energy and water use are allocated according to production volume.

Data set use approval

General comment The allocation is made in accordance with EN15804:A2. Allocation is based on physical and production shares. Energy and water use are allocated according to production volume There was no cut-off of raw materials or other inputs or outputs in any stage of the life cycle. Cut-offs in the background processes are according to the respective methodologies (see documentation of the relevant processes [Wernet, G. et al. 2016; https://www.ecoinvent.org/], [Dahlgren, L. et al., 2016]). Furthermore, brushes, clothes, buckets etc., used during the application process are excluded from the assessment since they are being considered capital goods.

LCI Method Principle

LCI Method Approaches No records found.

Completeness of product model No statement

Reviews Independent external review by Anni Viitala, Granlund Oy

License and access conditions Copyright yes License type Free of charge for all users and uses Access information None

Owner of data set Teknos Group

Technical purpose The paint is used on interior walls and ceilings, e.g. in apartments and offices. It is easy to apply and gives a smooth, matt surface with attractive appearance. TEKNOSPRO 5 can be applied to concrete, +L15:L16 plaster, filler, brick and to various building boards. It can also be used for repainting old alkyd and dispersion paint coats. The paint is used on interior walls and ceilings, e.g. in apartments and offices. It is easy to apply and gives a smooth, matt surface with attractive appearance. TEKNOSPRO 5 can be applied to concrete, +L15:L16 plaster, filler, brick and to various building boards. It can also be used for repainting old alkyd and dispersion paint coats.

Input Products No records found.

Co-Products No records found.

Data set version 00.05.001

Time stamp (last saved) 2025-07-01T13:37:20

Data set format

Other versions 00.03.001 00.03.000

Compliance systems EN 15804+A2 (Overall compliance: Fully compliant) ISO 14025 (Overall compliance: Fully compliant) ISO 21930 (Overall compliance: Fully compliant)

Tag

Registered in

Process is not registered in any registry

Data Set deregistration

Are you sure you want to deregister selected dataset?

Please enter the reason of deregistration and confirm.

YesNo