Process data set overview page

Data set: Balcony and Terrace product - RIIKKU POST RAILING (00.04.000)

View entire data set

Download data set as XML file

Download as ZIP file

Full name Balcony and Terrace product - RIIKKU POST RAILING

Location FI

Reference year 2025

Valid until 2030

Reference flow(s) Balcony and Terrace product - RIIKKU POST RAILING - 1.0 * 1.0 Stück (Number of pieces)

Type EPD

Parameterized? no

LCIA results included? yes

Category

Synonyms

Use advice for data set The studied system boundary was cradle to gate with options, modules C1–C4 and module D (A1–A3, A4, A5, C1-C4 and D). The studied system covers the following steps of life cycle according to EN 15804: A1 Raw material supply, A2 Transport, A3 Manufacturing, A4 Transport to building, A5 Installation to building, C1 Deconstruction, C2 Transportation of end-of-life C3 Waste processing and C4 Disposal. The benefits and loads beyond the system boundary are included to stage D, which consists of product reuse, recovery and recycling:

Data set use approval

General comment Allocation rules used are made according to the ISO14044:2006. Allocation is avoided when possible and when necessary, allocation is made based on physicalshares and also avoiding double calculations. Allocation is required if the production process produces more than one product and the flows of materials, energy and waste cannot be separately measured for the studied product. Allocation used in generic data sources follows the requirements of the EN 15804 -standard. It should be noticed that the allocation method “allocation, cut-off by classification” has been used for Ecoinvent 3.10 data, which complies with EN 15804. Avoiding allocation could not be avoided for following inputs as the information was only measured on factory process level. • Electricity: only measured on factory level. • District heating: only measured on factory level. • Fuels: only measured on factory level. • Production waste flows: only measured on factory level. • Production water consumption: not consumed in processes • Packaging materials: only measured on factory level. • Ancillary materials: only measured on factory level. According to EN 15804, flows leaving the system at the end-of-waste boundary of the product stage (A1-A3) are allocated as co-products. According to EN 15804, process that has a very low contribution to the overall revenue may be neglected in co-product allocation. Materials sent for recycling or energy recovery from manufacturing were not allocated, as it was estimated that their contribution to the overall revenue is very marginal. No other allocations were made in this assessment. Thisstudy follows the cut-off criteria stated in RTS PCR and EN 15804 -standard. This study does not exclude any modules or processes which represent more than 1 % of the emissions of studied life cycle stage. The study does not exclude any hazardous materials or substances. Excluded processes and the criteria for exclusion are given in following table. Machines and facilities (capital goods) required for and during production are excluded, as is transportation of employees.

LCI Method Principle

LCI Method Approaches No records found.

Completeness of product model No statement

Reviews Independent external review by Mari Kirss, Meetripuu OÜ

License and access conditions Copyright yes License type Free of charge for all users and uses Access information None

Owner of data set Riikku Rakenteet Oy

Technical purpose Riikku post railing solution is made of glass and aluminum. It is mainly used in balconies of apartments or other public spaces and walkways. It can be used for new construction and renovation projects. The railing features a frame made of aluminum, with glass as the main cladding. The railing posts are supported to the balcony slab either from its edge or on top of the slab, depending on the chosen design. The spacing between the posts is primarily 400-1200 mm which are influenced by facade design, environmental conditions, and existing regulations. The glass used is primarily tempered and laminated 4+4 mm glass or 5+5 mm glass. The railing can be implemented with cladding on either the outer or inner side of the posts. The Riikku balcony glazing can be installed on top of the railing, creating a completely glazed balcony.

Input Products No records found.

Co-Products No records found.

Data set version 00.04.000

Time stamp (last saved) 2025-08-13T08:45:45

Data set format

Compliance systems EN 15804+A2 (Overall compliance: Fully compliant) ISO 14025 (Overall compliance: Fully compliant) ISO 21930 (Overall compliance: Fully compliant)

Tag

Registered in

Process is not registered in any registry

Data Set deregistration

Are you sure you want to deregister selected dataset?

Please enter the reason of deregistration and confirm.

YesNo